|
Step 1
|
- Check roof slope.
- Sesame distance test:
- Measure the roof length (L) from the top row of sesame seeds.
- Divide roof length “L” into equal distances: Queen Tile is 330-350 (mm), Phoenix Tile is 340-350 (mm), optimal is 345 (mm). For concrete roof, this distance can be larger but not more than 370 (mm) for Queen Tile and 360 (mm) for Phoenix Tile.
- Sesame spacing is divided evenly from the top of the roof, the remaining excess is placed in the last one or two rows (depending on the remaining distance).
|
|
Step 2
|
- Roofing from right to left, from bottom to top.
- The first tile is placed at the right corner, 30 mm from the outer edge.
- Fully roofing a lower row as a standard, then continue to roof.
|
|
Note
|
- It is recommended to use screws for erection (both wooden and iron brackets are used). Do not use nails for construction, it will cause damage to the tile
|
